ITI Fitter Trade 50 MCQs Practice Questions – Part 3

ITI Fitter Trade 50 MCQs Practice Questions Part 2 | Fitter Multiple Choice Question Set Part 2 | Practice question for ITI students trade Fitter | Fitter trade MCQ for ITI trainees. (1.) Select the spindle speed (rpm) for H.S.S drill diameter 24 mm and cutting speed (V) 30 m/min to drill mild steel. (a.) 275 rpm (b.) 300 rpm (c.) 400 rpm (d.) 450 rpm (2.) Which one is used to bring the plates closely together after inserting the rivet in the hole? (a.) Drift (b.) Dolly (c.) Rivet set (d.) Caulking tool (3.) What is the use of bent snips? (a.) Groove cut (b.) Zigzag cut (c.) Straight cut (d.) Circular cut (4.) Name the zinc coated iron? (a.) Black iron (b.) Tinned iron (c.) Stainless iron (d.) Galvanised iron (5.) Calculate the weight of steel plate having length of 2000 mm, width of 500 mm, thickness of 4 mm and density of 7.85 g/cm3. (a.) 21.4 Kg (b.) 31.4 Kg (c.) 44.4 Kg (d.) 50.4 Kg (6.) Which sheet metal is highly resistant to corrosion and abrasion? (a.) Copper (b.) Black iron (c.) Aluminum (d.) Galvanised iron (7.) What is the use of stakes in sheet metal work? (a.) Rest of work (b.) Supporting piece (c.) Sharpening (d.) Folding shapes (8.) What is the material of solder? (a.) Welding rod (b.) Synthetic element (c.) Pure metal or alloy (d.) Non metallic element (9.) Which flux used for soldering steel? (a.) Ammonium chloride (b.) Zinc chloride (c.) Resin (d.) Paste (10.) What is the name of the process of finishing the drilled hole? (a.) Reaming (b.) Spot facing (c.) Counter boring (d.) Counter sinking (11.) Why hand reamers have uneven spacing of teeth? (a.) Reduce chattering (b.) Remove more metals (c.) Increase the efficiency (d.) Increase the life of the tool (12.) What is the purpose of clearance angle in twist drill? (a.) Prevent rough holes (b.) Prevent over size holes (c.) Prevent unequal angle of cutting edges (d.) Prevent friction of drill behind the cutting edges (13.) What is the angle of counter sinking for riveting? (a.) 75° (b.) 80° (c.) 90° (d.) 120° (14.) What is the reason for over heated drill while drilling? (a.) Drill held not correctly (b.) Work is not rigidly held (c.) Clearance angle is incorrect (d.) Flutes are clogged with chips (15.) What is the name of the operation to enlarge the hole for given depth? (a.) Reaming (b.) Spot facing (c.) Counter boring (d.) Counter sinking (16.) What will happen if the clearance angle of drill is more? (a.) Cutting edge will be blunt (b.) Cutting edge will not be sharp (c.) Cutting edge will become weak (d.) Cutting edge will not cut material (17.) What will happen if the spindle running out of centre while drilling? (a.) Drill will break (b.) Drills are over heated (c.) Drill make rough hole (d.) Over sized holes are made (18.) What A represents in grinding wheel specification 32A46H8V? (a.) Grade (b.) Grain size (c.) Type of bond (d.) Type of abrasive (19.) What is to be done after dressing the grinding wheel to run concentric? (a.) Truing (b.) Glazing (c.) Loading (d.) Dressing (20.) What is the product obtained from blast furnace? (a.) Pig iron (b.) Cast iron (c.) Wrought iron (d.) Malleable iron (21.) Which metal is used to manufacture magnets, ball bearing and cutting tool? (a.) Cobalt (b.) Cadmium (c.) Vanadium (d.) Molybdenum (22.) How much copper contains in pyrites ore? (a.) 0.15 (b.) 0.32 (c.) 0.5 (d.) 0.45 (23.) (a.) (b.) (c.) (d.) (24.) Which metal is resistant to many types of acids? (a.) Tin (b.) Nickel (c.) Lead (d.) Chromium (25.) What is the use of telescopic gauge? (a.) Measure depth (b.) Measure external dimension (c.) Measure angular dimension (d.) Measure size of holes, slots (26.) Which method is suitable to remove the broken stud very near to the surface? (a.) Ezy out method (b.) Making drill hole (c.) Prick punch method (d.) Using square taper punch (27.) What is the angle of counter sink head screws? (a.) 60° (b.) 90° (c.) 105° (d.) 120° (28.) Which angle is determined by the helix angle in drill bit? (a.) Point angle (b.) Rake angle (c.) Chisel angle (d.) Clearance angle (29.) What is the use of reamer? (a.) Drill a hole (b.) Enlarging a hole (c.) Threading a hole (d.) Finishing to correct size of the drilled hole (30.) What is the use of reamer? (a.) Drill a hole (b.) Enlarging a hole (c.) Threading a hole (d.) Finishing to correct size of the drilled hole (31.) What is the purpose of type N twist drills? (a.) Used for hard material (b.) Used for brittle material (c.) Used for soft and tough material (d.) Used for normal low carbon steel (32.) Which reamer will have a long taper lead? (a.) Hand reamer (b.) Socket reamer (c.) Machine reamer (d.) Helical fluted reamer (33.) What is the function of pilot in the hand reamer with pilot? (a.) Keep size of hole accurate (b.) Removes the burr from the hole (c.) Provide smooth functioning of reamer (d.) Keep reamer concentric with hole to be reamed (34.) Which decides the point angle of drill? (a.) Drill material (b.) Job material (c.) Cutting speed (d.) Size of the drill (35.) What is the drill size for reaming a 10 mm hole, if under size is 0.2mm and over size is 0.05mm? (a.) 8.5 mm (b.) 9.75 mm (c.) 10.00 mm (d.) 10.25 mm (36.) Which indicates the strength of bond in grinding wheel? (a.) Grid (b.) Grade (c.) Structure (d.) Grain size (37.) What is the name of the defect, if the surface of the grinding wheel develops smooth and shining appearance? (a.) Glazing (b.) Truing (c.) Loading (d.) Dressing (38.) Why agricultural equipment is made up of wrought iron? (a.) Low cost (b.) Heavy weight (c.) Wear resistant (d.) Corrosion resistant (39.) What is the range of carbon content in cast iron alloy? (a.) 2 to 4% (b.) 5 to 9% (c.) 6 to 9% (d.) 10 to 12% (40.) What is the operation of bevelling the end of a drilled hole ? (a.) Reaming (b.) Spot facing (c.) Counter boring (d.) Counter sinking (41.) What is the effect if clearance angle is incorrect? (a.) Over sized holes (b.) Over heated drills (c.) Rough holes (d.) Broken drill (42.) Which reamer is used for reaming internal Metric morse tapered holes? (a.) Helical fluted reamer (b.) Hand reamer with pilot (c.) Taper pin hand reamer (d.) Socket reamer with parallel shank (43.) Which reamer has a long taper lead? (a.) Socket reamer (b.) Hand reamer (c.) Machine reamer (d.) Helical fluted reamer (44.) What is the defect if pores of the grinding wheel get clogged? (a.) Drilling (b.) Glazing (c.) Loading (d.) Dressing (45.) Which cast iron has the ability to reduce vibration and tool chattering in machine tools? (a.) Grey cast iron (b.) White cast iron (c.) Nodular cast iron (d.) Malleable cast iron (46.) Which furnace is used to produce wrought iron? (a.) Blast furnace (b.) Cupola furnace (c.) Puddling furnace (d.) Electric arc furnace (47.) Which ore is used to extract zinc? (a.) Bauxite (b.) Galena (c.) Calamine (d.) Cassiterite (48.) Which tool is used to check the internal clearance of the bearing? (a.) Steel rule (b.) Feeler gauge (c.) Depth gauge (d.) Vernier caliber (49.) What is the angle of ACME thread ? (a.) 66° (b.) 55° (c.) 29° (d.) 45° (50.) What is the advantage of centre screw in die stock? (a.) To tighten the die (b.) To adjust the depth of cut (c.) To adjust the dia of internal thread (d.) To adjust the dia of external thread Previous QuestionNext Question Keywords :- ITI Mock , ITI Mock Test, ITI Mock Test NCVT, ITI Mock Test 2020, ITI Mock Test 2021, ITI Mock Test 2022, ITI Mock Test 1st Year, ITI Mock Test 2nd Year, ITI Mock Test PDF Download, ITI Test, ITI Test Paper, ITI Test Questions, ITI Test Book, ITI Test Paper in hindi, ITI Test 2020, ITI Test 2021, ITI Test 2022, ITI Questions Answers, ITI Questions & Answers, ITI Questions & Answers pdf, ITI Question Paper, ITI Questions pdf, ITI Question Paper PDF, ITI Questions Paper 2020, ITI Questions Paper 2021, ITI Questions Paper 2022, ITI Answer Key, ITI Paper Scheme, ITI Paper Date, ITI Paper 2020, ITI Paper 2021, ITI Paper 2022, ITI Previous Year Question Paper, ITI Previous Year Question Paper NCVT, ITI Previous Year Question Paper ED, ITI Previous Year Question Paper Engineering Drawing, ED, Workshop Calculations & Science, ITI Previous Year Question Paper Workshop Calculations & Science, ITI ED Book PDF, ITI ED Drawing, ITI ED Drawing Exaam Paper, ITI Jobs, ITI Form, ITI Form Online, ITI Online Form, ITI Online Form 2022, UP ITI, ITI Uttar Pradesh, ITI Haryana, ITI UK, ITI UttraKhand, UP ITI Result, Uk ITI Result, Haryana ITI Result, MP ITI Result, UP ITI Scholarship, Uk ITI Scholarship, Haryana ITI Scholarship, MP ITI Scholarship, UP ITI Merit List, Uk ITI Merit List, Haryana ITI Merit List, MP ITI Merit List, UP ITI Exam Date, Uk ITI Exam Date, Haryana ITI Exam Date, MP ITI Exam Date, UP ITI Updates, Uk ITI Updates, Haryana ITI Updates, MP ITI Updates, UP ITI Admission, Uk ITI Admission, Haryana ITI Admission, MP ITI Admission If you have any dought in any question. you can comment below, we will reply as soon as possible. and subscribe our Youtube channel & Telegram channel for more updates..

ITI Fitter Trade 50 MCQs Practice Questions – Part 3

Recent Posts

Daily Current Affairs Quiz: 15-December-2024

Daily Current Affairs Quiz: 14-December-2024

Daily Current Affairs Quiz: 13-December-2024

Daily Current Affairs Quiz:12-December-2024

Daily Current Affairs Quiz:11-December-2024

Daily Current Affairs Quiz: 10-December-2024

ITI Fitter Trade 50 MCQs Practice Questions – Part 3

Related Post

Recent Posts

Daily Current Affairs Quiz: 15-December-2024

Daily Current Affairs Quiz: 14-December-2024

Daily Current Affairs Quiz: 13-December-2024

Daily Current Affairs Quiz:12-December-2024

Daily Current Affairs Quiz:11-December-2024

Daily Current Affairs Quiz: 10-December-2024