ITI Fitter Trade 50 MCQs Practice Questions – Part 1

ITI Fitter Trade 50 MCQs Practice Questions Part 1 | Fitter Multiple Choice Question Set Part 1 | Practice question for ITI students trade Fitter | Fitter trade MCQ for ITI trainees. (1.) Which one is personal safety ? (a.) Keep the machine clean (b.) Concentrate on your work (c.) Keep the gang way and floor clean (d.) Keep the tools at their proper place (2.) Flammable of liquifiables solids are classified as. (a.) Class A fire (b.) Class B fire (c.) Class C fire (d.) Class D fire (3.) Which is the immediate life saving procedure ? (a.) First aid (b.) Call a docter (c.) Intensive care (d.) Medical treatment (4.) What is class of fire caused by fire wood , paper and clouth ? (a.) Class A fire (b.) Class B fire (c.) Class C fire (d.) Class D fire (5.) Which fire extinguisher filled with carbon tetra chloride and bromo chlorodifluoromethane (BCF) . (a.) Carbon dioxide (b.) Halon extinguisher (c.) Foam extinguisher (d.) Dry powder extinguisher (6.) Which comes under mechanical occupation hazards ? (a.) Noise (b.) Toxic (c.) Unskilled (d.) Unguarded machinery (7.) How to stop bleeping of injured person ? (a.) Tie bandage (b.) Apply oinment (c.) Apply tincture over the wound (d.) Apply pressure over the wound (8.) What is the period referred as golden hours? (a.) First 30 minutes after incident (b.) First 30 minutes (c.) First 45 minutes of admission (d.) First 60 minutes after treatment (9.) Which grinding machine is used for heavy duty work? (a.) Bench grinder (b.) Portable grinder (c.) Pedestal grinder (d.) Surface grinder (10.) What is the first step of avoiding accident in work place? (a.) Doing things in oneâ€™s own way (b.) By wearing safety equipment (c.) By observing safety precautions (d.) Doing things with a highly skilled working practice (11.) What is the colour code of bins for waste paper segregation? (a.) Red (b.) Green (c.) Blue (d.) White (12.) Which chisel is used for separating materials after chain drilling? (a.) Web chisel (b.) Flat chisel (c.) Cross cut chisel (d.) Dimaond point chisel (13.) Which fire extinguisher is used for flammable and running liquid fire? (a.) Foam extinguisher (b.) Halon extinguisher (c.) Dry powder extinguisher (d.) Carbon dioxide (CO2) extinguisher | (14.) Which file is used for sharpening the teeth of wood working saws? (a.) Barrete file (b.) Tinker s file (c.) Millsaw file (d.) Riffler file (15.) Where will be the weight of the hammer stamped? (a.) Face (b.) Pin (c.) Cheek (d.) Eye hole (16.) What will be the effect if the clearance angle of chisel is less than recommended angle while chipping? (a.) Cutting edge cannot penetrate, chisel will slip (b.) Cutting edge digs in, cut will be deeper (c.) Cutting edge will break (d.) Cutting edge of chisel move freely on straight line (17.) Name the property of metal to resist the effect of tensile forces without rupture. (a.) Ductility (b.) Tenacity (c.) Elasticity (d.) Malleability (18.) What is the accuracy of metric outside micrometer? (a.) 0.01 mm (b.) 0.001 mm (c.) 0.02 mm (d.) 0.002 mm (19.) What is the accuracy of a try square? (a.) 0.02 mm per 10 mm length (b.) 0.004 mm per 10 mm length (c.) 0.002 mm per 10 mm length (d.) 0.001 mm per 10 mm length (20.) Which punch is used for witness marks? (a.) Dot punch (b.) Pin punch (c.) Bell punch (d.) Center punch (21.) What is the name of the caliper having one leg with an adjustable divider point and other leg is bent? (a.) Jenny caliper (b.) Inside caliper (c.) Outside caliper (d.) Sparing caliper (22.) Which material is used to manufacture grade A V blocks? (a.) Tool steel (b.) Carbon steel (c.) High quality steel (d.) Closely grained cast iron (23.) Which chisel is used for removing materials on the corners of the keyways? (a.) Flat chisel (b.) Diamond point chisel (c.) Cross cut chisel (d.) Half round Nose Chisel (24.) Which file is having rows of teeth cut in one direction? (a.) Single cut file (b.) Curved cut file (c.) Second cut file (d.) Double cut file (25.) Which file is used for filing wood and leather? (a.) Hand file (b.) Bastard file (c.) Rasp cut file (d.) Single cut file (26.) Why the cutting faces of files are slightly bellied on length wise? (a.) Get proper grip over workpiece (b.) Filing flat surfaces is made easier (c.) Permit clearance between file face and the workpiece (d.) Ensure more pressure on workpiece while filing (27.) Which pitch of blade is used for cutting bronze, brass and cast iron? (a.) 0.80 mm (b.) 1.00 mm (c.) 1.40 mm (d.) 1.80 mm (28.) What happen if the clearance angle of chisel is too high? (a.) Slipping of chisel (b.) Digging on the surface (c.) Cutting edge will break (d.) Heavy metal removal from the surface (29.) Which type of hammer is used for riveting purpose? (a.) Sledge hammer (b.) Ball pein hammer (c.) Cross pein hammer (d.) Straight pein hammer (30.) What is the unit of cutting speed in drilling operation? (a.) m/ rev (b.) mm/ rev (c.) m/ min (d.) mm/ min (31.) What is the minor diameter of thread? (a.) Minor dia Major dia â€“ (2 x pitch) (b.) Minor dia Major dia + (2 x pitch) (c.) Minor dia Major dia + (2 x depth) (d.) Minor dia Major dia â€“ (2 x depth) (32.) Which is used to finish the resharpened divider point? (a.) File (b.) Grinder (c.) Scraper (d.) Oil stone (33.) What is the use of bevel protractor? (a.) Check the length (b.) Set the work piece (c.) Measure the angle (d.) Measure the depth (34.) Which vice is used for holding hollow cylindrical jobs? (a.) Pin vice (b.) Pipe vice (c.) Hand vice (d.) Bench vice (35.) What A denotes in ABC of first aid? (a.) Air way (b.) Attention (c.) Arresting (d.) Atmosphere (36.) What is the pitch of hacksaw blade used to cut conduit and other thin tubes? (a.) 0.8mm (b.) 1.0 mm (c.) 1.4 mm (d.) 1.8 mm (37.) Which metal cutting saw is used for cutting different profiles? (a.) Power saw (b.) Circular saw (c.) Contour band saw (d.) Horizontal band saw (38.) What is the process of breaking down the materials into organic compounds and can be used as manure? (a.) Land fills (b.) Recycling (c.) Compositing (d.) None of these (39.) What is the reason for scratches produced on filed surface? (a.) Pinning (b.) Glazing (c.) Warping (d.) File bite (40.) What is the colour code for plastic waste bin? (a.) Red (b.) Blue (c.) Green (d.) Yellow (41.) Why slight convexity is given on the face of hammer? (a.) To make effective striking (b.) To avoid digging of the edge (c.) To allow even load on striking (d.) To prevent damage to work surface (42.) What is the use of a try square? (a.) To check right analog (b.) To check acute angle (c.) To check obtuse angle (d.) To check straight angle (43.) What is the name of angle between the axis of chisel and job surface while chipping? (a.) Rake angle (b.) Point angle (c.) Clearance angle (d.) Angle of inclination (44.) Which marking media is poisonous? (a.) White wash (b.) Prussian blue (c.) Copper sulphate (d.) Cellulose lacquer | (45.) Which part of universal surface gauge holds the scriber? (a.) Snug (b.) Guide pin (c.) Rocker arm (d.) Fine adjustment screw (46.) What is the property of metal that permits no permanent distortion before breaking? (a.) Tenacity (b.) Hardness (c.) Brittleness (d.) Toughness (47.) A new hacksaw blade after a few stroke,becomes loose because of? (a.) improper selection of saw sets (b.) stretching of blade (c.) wrong pitch of the blade (d.) nut thread being worn out (48.) Why the hand taps are chamfered at the lead? (a.) Aligning (b.) Finishing (c.) Strengthening (d.) Gripping (49.) Why surface plates are made of stress relieved good quality cast iron? (a.) To prevent corrosion (b.) To prevent breaking (c.) To prevent distortion (d.) To prevent thermal expansion (50.) What is the main advantage of adjustable parallel block? (a.) To set different angle (b.) To set different depth (c.) To set different length (d.) To set different height Previous QuestionNext Question Keywords :- ITI Mock , ITI Mock Test, ITI Mock Test NCVT, ITI Mock Test 2020, ITI Mock Test 2021, ITI Mock Test 2022, ITI Mock Test 1st Year, ITI Mock Test 2nd Year, ITI Mock Test PDF Download, ITI Test, ITI Test Paper, ITI Test Questions, ITI Test Book, ITI Test Paper in hindi, ITI Test 2020, ITI Test 2021, ITI Test 2022, ITI Questions Answers, ITI Questions & Answers, ITI Questions & Answers pdf, ITI Question Paper, ITI Questions pdf, ITI Question Paper PDF, ITI Questions Paper 2020, ITI Questions Paper 2021, ITI Questions Paper 2022, ITI Answer Key, ITI Paper Scheme, ITI Paper Date, ITI Paper 2020, ITI Paper 2021, ITI Paper 2022, ITI Previous Year Question Paper, ITI Previous Year Question Paper NCVT, ITI Previous Year Question Paper ED, ITI Previous Year Question Paper Engineering Drawing, ED, Workshop Calculations & Science, ITI Previous Year Question Paper Workshop Calculations & Science, ITI ED Book PDF, ITI ED Drawing, ITI ED Drawing Exaam Paper, ITI Jobs, ITI Form, ITI Form Online, ITI Online Form, ITI Online Form 2022, UP ITI, ITI Uttar Pradesh, ITI Haryana, ITI UK, ITI UttraKhand, UP ITI Result, Uk ITI Result, Haryana ITI Result, MP ITI Result, UP ITI Scholarship, Uk ITI Scholarship, Haryana ITI Scholarship, MP ITI Scholarship, UP ITI Merit List, Uk ITI Merit List, Haryana ITI Merit List, MP ITI Merit List, UP ITI Exam Date, Uk ITI Exam Date, Haryana ITI Exam Date, MP ITI Exam Date, UP ITI Updates, Uk ITI Updates, Haryana ITI Updates, MP ITI Updates, UP ITI Admission, Uk ITI Admission, Haryana ITI Admission, MP ITI Admission If you have any dought in any question. you can comment below, we will reply as soon as possible. and subscribe our Youtube channel & Telegram channel for more updates..

ITI Fitter Trade 50 MCQs Practice Questions – Part 1

View Comments

Recent Posts

Daily Current Affairs Quiz: 15-December-2024

Daily Current Affairs Quiz: 14-December-2024

Daily Current Affairs Quiz: 13-December-2024

Daily Current Affairs Quiz:12-December-2024

Daily Current Affairs Quiz:11-December-2024

Daily Current Affairs Quiz: 10-December-2024

ITI Fitter Trade 50 MCQs Practice Questions – Part 1

View Comments

Related Post

Recent Posts

Daily Current Affairs Quiz: 15-December-2024

Daily Current Affairs Quiz: 14-December-2024

Daily Current Affairs Quiz: 13-December-2024

Daily Current Affairs Quiz:12-December-2024

Daily Current Affairs Quiz:11-December-2024

Daily Current Affairs Quiz: 10-December-2024