ITI Fitter Trade 50 MCQs Practice Questions – Part 8

ITI Fitter Trade 50 MCQs Practice Questions Part 2 | Fitter Multiple Choice Question Set Part 2 | Practice question for ITI students trade Fitter | Fitter trade MCQ for ITI trainees. (1.) Which grade slip gauge is used for precision tool room applications? (a.) Grade 00 (b.) Grade 0 (c.) Grade I (d.) Grade II (2.) Which operation is performed with fine abrasive particles? (a.) Filing (b.) Lapping (c.) Scraping (d.) Polishing (3.) What is the purpose of normalising? (a.) Add cutting ability (b.) Develop high hardness (c.) Increase wear resistance (d.) Remove stress and strain (4.) Which operation is performed with fine abrasive particles? (a.) Filing (b.) Lapping (c.) Scraping (d.) Polishing (5.) What is the purpose of normalising? (a.) Add cutting ability (b.) Develop high hardness (c.) Increase wear resistance (d.) Remove stress and strain (6.) Which structure of steel contain 0% carbon? (a.) Ferrite (b.) Pearlite (c.) Austenite (d.) Cementite (7.) Which type of key is used for transmitting high torque on both direction of rotation? (a.) Flat saddle key (b.) Taper sunk key (c.) Woodruft key (d.) Tangential key (8.) What is the use of ring gauge? (a.) Check hole diameter (b.) Check shaft diameter (c.) Check tapered shaft diameter (d.) Check internal thread diameter (9.) Which gauge is used to check the accuracy of an internal thread? (a.) Ring gauge (b.) Snap gauge (c.) Thread ring gauge (d.) Centre gauge (10.) What is the procedure to select the slip gauge for particular dimension? (a.) Built with grade accuracy (b.) Minimum number of blocks (c.) Maximum number of block (d.) Start wringing with small size slip gauge (11.) Which process improves the quality of fit between the mating components? (a.) Filing (b.) Turning (c.) Grinding (d.) Lapping (12.) Which abrasive is used for lapping hardened steel and cast iron ? (a.) Silicon carbide (b.) Boron carbide (c.) Aluminium oxide (d.) Fused aluminum (13.) Which finishing operation is performed by the tool that rotate and reciprocate simultaneously? (a.) Drilling (b.) Honing (c.) Lapping (d.) Grinding (14.) Why holes are provided in ring type lapping? (a.) Lubrication (b.) Removal of heat (c.) Hold lapping compound (d.) Increase the efficiency (15.) Which type of key has one face curvature to match shaft surface? (a.) Sunk key (b.) Flat saddle key (c.) Circular taper key (d.) Hallow saddle key (16.) Which type of cutting tool is tempered by heating upto 230°C? (a.) Taps (b.) Drills (c.) Turning tool (d.) Reamers (17.) Why normalising process is carried out in steel? (a.) To add cutting ability (b.) To develop high hardness (c.) To remove stress and strain (d.) To increase wear resistance (18.) Which heat treatment process increases the wear resistance of steel? (a.) Annealing (b.) Tempering (c.) Hardening (d.) Normalising (19.) What is the purpose of annealing? (a.) To soften the steel (b.) To add cutting ability (c.) To increase wear resistance (d.) To refine the grain structure of the steel (20.) Why square head screws are provided with collar? (a.) Protect work surface (b.) Raise the head width (c.) Provide leak proof joint (d.) Provide access for tools (21.) What is the purpose of taper plug gauges? (a.) Check the hole with perfect fit (b.) Check the inside threaded dia (c.) Check tapered hole with perfect fit (d.) Check the taper accuracy of outside dia (22.) Why slots are provided in the adjustable ring lap? (a.) For lubrication (b.) Permit clearance (c.) For expansion (d.) Permit feeding of lapping compound (23.) Which abrasive has excellent cutting properties and expensive? (a.) Diamond (b.) Boron carbide (c.) Silicon carbide (d.) Aluminium oxide (24.) What is lapping? (a.) Filing operation (b.) Grinding operation (c.) Chiseling operation (d.) Precision finishing operation (25.) Which type of fixture is used for machining on evenly spaced surfaces? (a.) Plate fixture (b.) Vice jaw fixture (c.) Indexing fixture (d.) Angle plate fixture (26.) Which is the important factor to determine the construction of fixture? (a.) Machining method (b.) Location and clamping (c.) Tool guiding and frame (d.) Size of work piece and tool (27.) What is the purpose of setting blocks used in the fixture? (a.) Position the balancing weight (b.) Position the clamp and locators (c.) Position the fixture on machine table (d.) Position the fixture and work related to cutter (28.) Which type of jig is used for awkwardly shaped work piece to drill at different angles? (a.) Post jig (b.) Solid jig (c.) Indexing jig (d.) Trunnion jig (29.) Which device holds, supports, locates and also guide the cutting tool for operation? (a.) Jig (b.) Fixture (c.) Chuck (d.) Machine vice (30.) Why two or four hold down slots are provided in the base plate of milling fixture? (a.) For rigid clamping (b.) For guiding the tool (c.) For locating workpiece (d.) For adjusting the job setting (31.) What is the advantages of mass production? (a.) Initial expenditure is low (b.) Jigs and fixture are not needed (c.) Cost and time reduced for manufacturing (d.) Special purpose machines are not necessary (32.) Which bush is used to provide a hardened hole for renewable bushes? (a.) Slip bush (b.) Plain bush (c.) Fixed bush (d.) Liner bush (33.) Which device is used to hold, locate and not guide the cutting tool during machining operation? (a.) Jig (b.) Fixture (c.) C clamp (d.) Machine vice (34.) Which type of fixture provides an easy method of holding parts for machining? (a.) Turning fixture (b.) Vice fixture (c.) Milling fixture (d.) Grinding fixture (35.) Which part restrict incorrect loading of component in jig? | Which part restrict incorrect loading of component in jig? (a.) Clamp (b.) Guide plate (c.) Locating pin (d.) Press fit bush (36.) Why tenons are provided at the bottom of base plate of milling fixture? (a.) For guiding the tool (b.) For clamping purpose (c.) For balancing workpiece (d.) For proper location of fixture (37.) What is the purpose of drill bushes provided in the drill jig? (a.) To support base plate (b.) To support drill plate (c.) To locate and guide cutting tool (d.) To restrict the movement of job (38.) What is the colour of the aluminium metal? (a.) Yellow (b.) Redish (c.) Whitish grey (d.) Silvery white (39.) Which ore produces lead metal? (a.) Pyrites (b.) Bauxite (c.) Malchite (d.) Galena (40.) What is the name of metal alloy of lead, tin,copper and antimony? (a.) Bronze (b.) Gilding metal (c.) Babbitt metal (d.) Leaded bronze (41.) What is the ratio of copper and zinc in “Muntz metal”? (a.) 63:37 (b.) 60:40 (c.) 57:43 (d.) 70:30 (42.) Which metal is extracted from bauxite ore? (a.) Zinc (b.) Brass (c.) Copper (d.) Aluminium (43.) Which metal is used in the preparation of paint? (a.) Zinc (b.) Lead (c.) Brass (d.) Aluminium (44.) Which type of belt drive, the driven shaft will rotate in opposite direction to driver shaft? (a.) Stepped drive (b.) Open belt drive (c.) Cross belt drive (d.) Right angled belt drive (45.) Which type of gear drive changes rotary movement to linear movement? (a.) Hypoid (b.) Herring bone (c.) Rack and pinion (d.) Helical gear (46.) Which type of belt is used if the distance between the shafts are too short? (a.) V’ belt (b.) Flat belt (c.) Link belt (d.) Ribbed belt (47.) Why the small steel wedge is tapped under the machine in lifting operation? (a.) To prevent vibration (b.) To reduce the weight (c.) To accept the crowbar (d.) To balance the machine (48.) How to adjust the tension of belt between two fixed pulleys? (a.) By sliding the pulley (b.) By fixing idler pulley (c.) By adjusting the length of belt (d.) By adjusting the screw of pulley (49.) Why vertical belt drive is avoided in power transmission? (a.) Because of small wrapping of belt (b.) Because of excessive contact (c.) Because of gravitational pull and slippage (d.) Because of increase in surface speed of pulley (50.) Why the face of pulley is “Crowned” in power transmission? (a.) Increase the tension (b.) Decrease the tension (c.) Keep the belt centralised (d.) Allow the pulley free rotation Previous QuestionNext Question Keywords :- ITI Mock , ITI Mock Test, ITI Mock Test NCVT, ITI Mock Test 2020, ITI Mock Test 2021, ITI Mock Test 2022, ITI Mock Test 1st Year, ITI Mock Test 2nd Year, ITI Mock Test PDF Download, ITI Test, ITI Test Paper, ITI Test Questions, ITI Test Book, ITI Test Paper in hindi, ITI Test 2020, ITI Test 2021, ITI Test 2022, ITI Questions Answers, ITI Questions & Answers, ITI Questions & Answers pdf, ITI Question Paper, ITI Questions pdf, ITI Question Paper PDF, ITI Questions Paper 2020, ITI Questions Paper 2021, ITI Questions Paper 2022, ITI Answer Key, ITI Paper Scheme, ITI Paper Date, ITI Paper 2020, ITI Paper 2021, ITI Paper 2022, ITI Previous Year Question Paper, ITI Previous Year Question Paper NCVT, ITI Previous Year Question Paper ED, ITI Previous Year Question Paper Engineering Drawing, ED, Workshop Calculations & Science, ITI Previous Year Question Paper Workshop Calculations & Science, ITI ED Book PDF, ITI ED Drawing, ITI ED Drawing Exaam Paper, ITI Jobs, ITI Form, ITI Form Online, ITI Online Form, ITI Online Form 2022, UP ITI, ITI Uttar Pradesh, ITI Haryana, ITI UK, ITI UttraKhand, UP ITI Result, Uk ITI Result, Haryana ITI Result, MP ITI Result, UP ITI Scholarship, Uk ITI Scholarship, Haryana ITI Scholarship, MP ITI Scholarship, UP ITI Merit List, Uk ITI Merit List, Haryana ITI Merit List, MP ITI Merit List, UP ITI Exam Date, Uk ITI Exam Date, Haryana ITI Exam Date, MP ITI Exam Date, UP ITI Updates, Uk ITI Updates, Haryana ITI Updates, MP ITI Updates, UP ITI Admission, Uk ITI Admission, Haryana ITI Admission, MP ITI Admission If you have any dought in any question. you can comment below, we will reply as soon as possible. and subscribe our Youtube channel & Telegram channel for more updates..

ITI Fitter Trade 50 MCQs Practice Questions – Part 8

Recent Posts

Daily Current Affairs Quiz: 21-December-2024

Daily Current Affairs Quiz: 20-December-2024

Daily Current Affairs Quiz: 19-December-2024

Daily Current Affairs Quiz: 18-December-2024

Daily Current Affairs Quiz: 17-December-2024

Daily Current Affairs Quiz: 16-December-2024

ITI Fitter Trade 50 MCQs Practice Questions – Part 8

Related Post

Recent Posts

Daily Current Affairs Quiz: 21-December-2024

Daily Current Affairs Quiz: 20-December-2024

Daily Current Affairs Quiz: 19-December-2024

Daily Current Affairs Quiz: 18-December-2024

Daily Current Affairs Quiz: 17-December-2024

Daily Current Affairs Quiz: 16-December-2024