ITI Fitter Trade 50 MCQs Practice Questions – Part 6

ITI Fitter Trade 50 MCQs Practice Questions Part 2 | Fitter Multiple Choice Question Set Part 2 | Practice question for ITI students trade Fitter | Fitter trade MCQ for ITI trainees. (1.) What is the extreme permissible sizes within which the operator is expected to make the component? (a.) Basic size (b.) Actual size (c.) Nominal size (d.) Limits of size (2.) What is the size of the component by actual measurement after it is manufactured? (a.) Limit size (b.) Actual size (c.) Maximum size (d.) Minimum size (3.) A dimension is stated as 25 ± 0.02 mm in a drawing. What is the tolerance? (a.) +0.02 mm (b.) -0.02 mm (c.) 0.04 mm (d.) 25.00 mm (4.) How to identify high spots while scraping? (a.) Prussian blue (b.) White chalk (c.) Copper sulphate (d.) Cellulose lacquer (5.) What is the smaller of the two limits of size? (a.) Actual size (b.) Maximum limit of size (c.) Minimum limit of size (d.) Limit of size (6.) Which chart is used to record the skill of the operator in practice? (a.) Testing chart (b.) Levelling chart (c.) Geometric chart (d.) Performance chart (7.) Which bearing withstands load is parallel to its axis? (a.) Needle bearing (b.) Thrust bearing (c.) Plain bearing (d.) Split bearing (8.) Which belongs to Total Productive Maintenance? (a.) Supply defective goods to the customers (b.) Unscheduled maintenance (c.) Produces goods without increasing product quality (d.) Reduces maintenance cost (9.) What is the high level formula for the lean manufacturing OEE? (a.) Availability x Quantity x Quality (b.) Availability x Productivity x Quality (c.) Product output x Quality x Availability (d.) Product output x Quantity x Quality (10.) What is the use of dowel in assembly technique? (a.) Accurate positioning of two or more parts (b.) Securing components together (c.) Eliminate the need for drilling (d.) Increase the efficiency of fit (11.) Which maintenance record mention the date of commissioning of machine? (a.) Inspection check list (b.) Equipment record (c.) Product manual (d.) Servicing manual (12.) What is the name of activity carried out to prevent break down of machinery in basic maintenance? (a.) Routine maintenance (b.) Preventive maintenance (c.) Repairing activity (d.) Inspection activity (13.) What is the use of spring pins? (a.) Easy assembly and disassembly of parts (b.) Locate assemblies with wide tolerance in corresponding holes (c.) Retain the parts in assembly (d.) Accurate positioning of parts (14.) Which bolt in the assembly prevent the relative movement between the workpieces? (a.) Anti-fatigue bolt (b.) T bolt (c.) Body fit bolt (d.) Self locking bolt (15.) Which assembly technique is similar to riveting method? (a.) Dowelling (b.) Pinning (c.) Peening (d.) Staking (16.) Why extra clearance given between bearing and journal in the aluminium alloy bearing? (a.) To overcome high thermal expansion (b.) To overcome learner expansion (c.) To overcome coefficient expansion (d.) To overcome lubricant to flow freely (17.) Which metal is very soft and heavy in sheet metal work? (a.) Lead (b.) Black iron (c.) Aluminium (d.) Copper sheet (18.) Which sheet metal withstand contact with water and exposure to weather? (a.) Black iron (b.) Copper sheet (c.) Stainless sheet (d.) Galvanised iron (19.) What is the purpose of drift in riveting operation? (a.) Position the rivet (b.) Make metal to metal joint (c.) Align the holes to be riveted (d.) Prevent damage to rivet head (20.) Which hammer is suitable for riveting? (a.) Plastic hammer (b.) Ball pein hammer (c.) Cross pein hammer (d.) Straight pein hammer (21.) Which notch is cut at an angle of 45° to the corner of the sheet metal? (a.) Wire notch (b.) Slant notch (c.) Square notch (d.) Straight notch (22.) Name the joint made by fastening two edges of sheet metal together? (a.) Hem (b.) Seam (c.) Notch (d.) Groove (23.) What is the flux used for soldering in the form of powder and evaporates while heating? (a.) Resin (b.) Zinc chloride (c.) Hydrochloric acid (d.) Ammonium chloride (24.) Which rivet is used to avoid the projection of rivet head? (a.) Pan head rivet (b.) Snap head rivet (c.) Conical head rivet (d.) Counter sunk head rivet (25.) What is the minimum distance between the rivets to avoid bucking? (a.) 2D (b.) 2.5D (c.) 3D (d.) 3.5D (26.) Which type of filler rod is used in gas welding of stainless steel? (a.) Pure aluminium (b.) Copper silver alloy (c.) Columbium stainless steel (d.) Copper coated mild steel (27.) What will cause if the nozzle touches the molten pool? (a.) Spark (b.) Smoke (c.) Back fire (d.) Flash back (28.) What is the function of AC welding transformer? (a.) It converts to low voltage high current ampere (b.) It converts to high voltage and low current ampere (c.) It converts to low voltage and low current ampere (d.) It converts to high voltage and high current ampere (29.) What is the disadvantage of AC welding transformer? (a.) More initial cost (b.) Not free from arc blow (c.) More maintenance cost (d.) Not suitable for welding non ferrous metal (30.) Which arc welding machine can be used anywhere in the field work even away from electric lines? (a.) Rectifier set (b.) Motor generator set (c.) Engine generator set (d.) AC welding transformer (31.) Which arc welding machine provides better heat distribution in the electrode and job? (a.) Rectifier set (b.) Motor generator set (c.) Welding transformer (d.) Engine generator set (32.) What is the colour painted on the acetylene gas cylinders? (a.) Black (b.) Green (c.) Blue (d.) Maroon (33.) What is the angle to be maintained in the blow pipe and filler rod in the left ward welding technic? (a.) 60° & 30° (b.) 50° & 40° (c.) 30° & 50° (d.) 60° & 40° (34.) Which factor determine the current setting during welding? (a.) Types of joint (b.) Position of weld (c.) Length of electrode (d.) Diameter of electrode (35.) What is the OCV for welding in step-down transformer which reduces the main supply voltage (220 or 440 volts)? (a.) 40 and 100 volt (b.) 50 and 100 volt (c.) 30 and 20 volt (d.) 20 and 25 volt (36.) Which is the welding machine designed to supply both A.C and D.C current for welding ferrous and non-ferrous metals using all types of electrode? (a.) Rectifier set (b.) Transformer set (c.) Motor generator set (d.) Engine generator set (37.) What is the name of distortion occurs in the weld direction? (a.) Angular distortion (b.) Bending distortion (c.) Longitudinal distortion (d.) Transverse distortion (38.) What is the name of the the metal edge in an angle during welding and cutting operations? (a.) Kerf (b.) Drag (c.) Bevel (d.) Gouging (39.) Why the cylinder keys are not removed from the cylinder while welding? (a.) To prevent gas leak (b.) To adjust the gas supply (c.) To open and close frequently (d.) To close quickly in case of fire (40.) Which process blow out the cylinder valve socket before connecting the regulator? (a.) Cracking (b.) Back fire (c.) Flash back (d.) Pressure testing (41.) What is the oxygen cylinder colour? (a.) Red (b.) Blue (c.) Black (d.) Maroon (42.) What is the storing capacity of oxygen cylinder? (a.) 7 m3 (b.) 10 m3 (c.) 14 m3 (d.) 15 m3 (43.) What is the equipment used to protect the body from flying spark during gas cutting? (a.) Leather cap (b.) Leather apron (c.) Leather shoes (d.) Cutting goggles (44.) How to extinguish the flame after use in gas welding? (a.) Shut off oxygen and dip blow pipe in water (b.) Shut off oxygen and acetylene valve at a time (c.) Shut off oxygen valve first next acetylene valve (d.) Shut off acetylene valve first next oxygen valve (45.) Why humming sound effects during arc welding? (a.) Long arc length (b.) Speedy welding (c.) Short arc welding (d.) Normal arc length (46.) Which internal defect in welding is invisible to naked eye? (a.) Spatter (b.) Porasity (c.) Undercut (d.) Stray arc (47.) Which type of jig do not have base plate? (a.) Table jig (b.) Plate jig (c.) Template jig (d.) Sandwich jig (48.) Which type of bush is used in jig to perform more than one operation in same location? (a.) Slip bush (b.) Plain bush (c.) Fixed bush (d.) Liner bush (49.) What is the purpose of grooves provided in the ‘V’ blocks? (a.) Reduce the weight (b.) Support the work piece (c.) Accommodate the clamp (d.) Allow thermal expansion (50.) Why the balancing weight is provided in the turning fixture? (a.) To guide tool (b.) To balance the tool (c.) To balance worktable (d.) To balance irregular workpiece Previous QuestionNext Question Keywords :- ITI Mock , ITI Mock Test, ITI Mock Test NCVT, ITI Mock Test 2020, ITI Mock Test 2021, ITI Mock Test 2022, ITI Mock Test 1st Year, ITI Mock Test 2nd Year, ITI Mock Test PDF Download, ITI Test, ITI Test Paper, ITI Test Questions, ITI Test Book, ITI Test Paper in hindi, ITI Test 2020, ITI Test 2021, ITI Test 2022, ITI Questions Answers, ITI Questions & Answers, ITI Questions & Answers pdf, ITI Question Paper, ITI Questions pdf, ITI Question Paper PDF, ITI Questions Paper 2020, ITI Questions Paper 2021, ITI Questions Paper 2022, ITI Answer Key, ITI Paper Scheme, ITI Paper Date, ITI Paper 2020, ITI Paper 2021, ITI Paper 2022, ITI Previous Year Question Paper, ITI Previous Year Question Paper NCVT, ITI Previous Year Question Paper ED, ITI Previous Year Question Paper Engineering Drawing, ED, Workshop Calculations & Science, ITI Previous Year Question Paper Workshop Calculations & Science, ITI ED Book PDF, ITI ED Drawing, ITI ED Drawing Exaam Paper, ITI Jobs, ITI Form, ITI Form Online, ITI Online Form, ITI Online Form 2022, UP ITI, ITI Uttar Pradesh, ITI Haryana, ITI UK, ITI UttraKhand, UP ITI Result, Uk ITI Result, Haryana ITI Result, MP ITI Result, UP ITI Scholarship, Uk ITI Scholarship, Haryana ITI Scholarship, MP ITI Scholarship, UP ITI Merit List, Uk ITI Merit List, Haryana ITI Merit List, MP ITI Merit List, UP ITI Exam Date, Uk ITI Exam Date, Haryana ITI Exam Date, MP ITI Exam Date, UP ITI Updates, Uk ITI Updates, Haryana ITI Updates, MP ITI Updates, UP ITI Admission, Uk ITI Admission, Haryana ITI Admission, MP ITI Admission If you have any dought in any question. you can comment below, we will reply as soon as possible. and subscribe our Youtube channel & Telegram channel for more updates..

ITI Fitter Trade 50 MCQs Practice Questions – Part 6

Recent Posts

Daily Current Affairs Quiz: 22-November-2024

Daily Current Affairs Quiz: 21-November-2024

Daily Current Affairs Quiz: 20-November-2024

Daily Current Affairs Quiz: 19-November-2024

Daily Current Affairs Quiz: 18-November-2024

Daily Current Affairs Quiz: 17-November-2024

ITI Fitter Trade 50 MCQs Practice Questions – Part 6

Related Post

Recent Posts

Daily Current Affairs Quiz: 22-November-2024

Daily Current Affairs Quiz: 21-November-2024

Daily Current Affairs Quiz: 20-November-2024

Daily Current Affairs Quiz: 19-November-2024

Daily Current Affairs Quiz: 18-November-2024

Daily Current Affairs Quiz: 17-November-2024